Free Shipping Over $100 (US)

Instructions: Brydge 12.9 - for iPad Pro 12.9 inch

Brydge 12.9 Support Videos >


INSERT / REMOVE

1 - Place your iPad into the hinges with the home button on the right, and your Brydge placed on a flat surface


2 - Lift iPad to test the hinge grip. Your iPad and Brydge should be held tightly together


3 - If iPad is loose, remove and give the hinges a gentle squeeze. Repeat this process until your iPad is held firmly


4 - To remove, grab your iPad and pull straight up, with one hand firmly holding your Brydge against a hard surface



PAIR THE KEYBOARD


5a - Press and hold the power button for 3 seconds


5b - Press and hold the BluetoothTM button for 3 seconds


6 - On your iPad, under Settings>Bluetooth, tap Brydge 12.9


7 - NOTE: When turning on your Brydge, the caps lock, Bluetooth, and battery keys will flash once to let you know the Brydge is powered on. The same lighs will flash twice when you turn the unit off



CHARGE

8 - To check battery life, press and hold the battery key:
One Flash = 25%
Two Flashes = 50%
Three Flashes = 75%
Four Flashes = Fully charged


9 - Battery key will begin slowly flashing red when the battery is low and needs charging


10 - Insert the supplied MICRO USB cable

NOTE: Charging can take up to 3 hours


11 - Charging is confirmed by a solid red light under the batttery key. Your Brydge is fully charged when the light turns off

NOTE: Charging can take up to 3 hours



Keyboard Layout: BRYDGE 12.9





Brydge 12.9 Support Videos:

Video:
How To Turn On & Pair the Brydge 12.9 to Bluetooth




Video:
How To Test the Battery & Charge The Brydge 12.9