$5 Flat Rate Shipping (US/UK)

Getting to know your BrydgeAir

Video Tutorials

! Key Functions

1 Introduction

Your Brydge Air is designed to fit both the iPad Air and iPad Air 2. The BrydgeAir ships ready for the iPad Air 2 however if you have an iPad Air, a small change is required before you can connect the two devices. In the box you have received a second pair of silicone shims, these shims are designed for the increased thickness of the iPad Air and are essential to ensure it is held securely.

    CHANGING THE SHIMS

  • Remove the existing shims that are in the keyboard by pulling them out gently
  • Once removed, ensure there is no remaining glue or residue on the bare hinge.
  • Before removing the tape from the new shims, place them into their respective hinges to ensure you have them paired correctly (right and left).
  • Remove the tape and insert the left shim into the hinge. TIP: Ensure the bottom of the shim is resting in the heal of the hinge before fixing the sides. Repeat the process for the right shim.
  • Once both are installed, Insert the iPad and push downwards to make sure the shims are pressing against the hinge correctly.
  • Finally check the grip of the keyboard on the iPad. If there is movement or it is too loose, remove the iPad and gently squeeze the hinge until you get the right amount of pressure on the iPad
    NOTE:
    • Do not stretch the shims when inserting them into the hinge, ensure the fit is perfect.
    • The shims are not interchangeable, once removed they will need to be replaced.

 

2 Connecting Your BrydgeAir

Unfold hinges to the vertical position.

Place your iPad Air into the hinges with the home button on the right-hand side.

3 Important Buttons

icon
Power: Turns the keyboard on and off.
icon
Keyboard: Puts the keyboard into pairing mode.
icon
Speakers: Turns speakers on and off and activates the pairing process.

image

4 Looking after the battery

Battery Indicator

The backslash key on the right of the BrydgeAir keyboard doubles as the battery indicator.

  • Flashing Blue: Low Battery (and on startup / pairing)
  • Right Hand Shift Key Solid RedCharging
  • No Light: Fully Charged

To charge your BrydgeAir keyboard, connect it to any USB port using the cable provided.

Pairing your BrydgeAir

It is important to the note that there are 2 separate pairing processes, one for the keyboard and the other for the speakers.

5 Pairing your BrydgeAir for the first time

  • Turn the power button icon to the on position (slide it to the right - a green dot will appear)
  • On your iPad, go to Settings > Bluetooth (and ensure your bluetooth is turned on).
  • Press and hold the keyboard pairing button (this button is on the front of the keyboard) icon for 2 seconds (a blue light will appear on the keyboard).
  • Select BrydgeAir Keyboard under bluetooth devices.

6 Pairing the speakers for the first time

  • On your iPad, go to Settings > Bluetooth
  • Press and hold the speaker pairing button icon for 4 seconds until you hear a 4-tone beep, followed by a short 2-tone beep.
  • Select BrydgeAir Sound under your iPad Air's bluetooth devices. (Settings > Bluetooth)
  • Pairing is confirmed by a single-tone beep (initial pairing may take up to 5 seconds).

7 Turning the speakers on and off

You can turn the speakers on and off to save battery.

On:

Press and hold the speaker button icon for 2 seconds and release when you hear the 4-tone beep.

Off:

Press and hold the speaker button icon for 4 seconds.

The speakers will automatically re-connect with your iPad once turned back on.

Getting to know your Brydge+

1 Connecting Your Brydge+

image

Unfold the hinges to the vertical position.

image

Place your iPad Air into the hinges with the home button on the right-hand side.

2 Looking after the battery

Battery Indicator

  • Red: Charging / Fully charged
  • Blue (flashing slowly): Low battery

image

To charge your Brydge+ keyboard, connect to any USB port using the cable provided.

Pairing your Brydge+

It is important to the note that there are 2 separate pairing processes, one for the keyboard and the other for the speakers.

3 Pairing your Brydge+ for the first time

  • Turn the power button icon to the on position
  • On your iPad, go to Settings > Bluetooth (and ensure your bluetooth is turned on).
  • Press and hold "Control" & "K" for 2 seconds (the on/off button will flush blue).
  • Select Brydge Keyboard under bluetooth devices.

4 Pairing the speakers for the first time

  • On your iPad, go to Settings > Bluetooth
  • Press and hold "Control" & "B" for 4 seconds until you hear a 4-tone beep (the speakers are now activated).
  • Press "Control" & "B" once more very quickly, you will hear a second two-tone beep.
  • Select Brydge Speakers under bluetooth devices. Pairing is confirmed by a single-beep (initial pairing may take up to 5 seconds).

5 Turning the speakers on and off

On:

Press and hold "Control" & "B" for 4 seconds, you will hear the power-up tone.

Off:

Press and hold "Control" & "B" for 4 seconds, you will hear the power-down tone.

The speakers will automatically re-connect with your iPad once turned back on.